What should be paid attention to in the daily maintenance of Steel Strapping Machine?

In the field of packaging in modern industry, Steel Strapping Machine plays a vital role. It can pack all kinds of goods efficiently and firmly to ensure the safety of goods during transportation and storage. However, like any mechanical equipment, Steel Strapping Machine also needs regular maintenance to keep it in good operating condition and extend its service life. The following are some of the things that need to be focused on in the daily maintenance of Steel Strapping Machine, and also show our company's professional insights and high-quality services in this regard.
First of all, cleaning work is the basis of daily maintenance. Since the steel strapping machine will be exposed to various dust, debris, metal chips and other impurities of the steel strap during operation, if these impurities accumulate too much, they may enter the internal mechanical structure and electrical components of the machine and affect its normal operation. Therefore, after each use, the surface of the machine, the belt feeding track, the tensioning device and the sealing part should be thoroughly cleaned. You can use a clean soft cloth to wipe it. For some difficult-to-remove dirt, you can use an appropriate detergent, but be careful to avoid the detergent from entering the electrical components to prevent short circuits and other faults.
Secondly, inspection and lubrication of key mechanical parts are essential. For example, the transmission chain, gears, guide rails and other parts of the baler will wear out during long-term operation. Check the wear of these parts regularly. If the chain is loose or the gear tooth surface is obviously worn, it should be adjusted or replaced in time. At the same time, in order to reduce friction and reduce the wear rate of parts, it is necessary to add an appropriate amount of lubricating oil to these moving parts regularly. When choosing lubricating oil, it is necessary to select lubricating oil of appropriate specifications and quality according to the model and working environment of the machine to ensure that it can provide good lubrication protection for mechanical parts under different temperature and humidity conditions.
Furthermore, the maintenance of the electrical system should not be ignored. Check whether the electrical circuit is damaged, aged or loose, and ensure that the wires are firmly connected without the risk of short circuit or open circuit. Clean the dust in the electrical control cabinet regularly, because dust accumulation may cause poor heat dissipation of electrical components, thereby causing malfunctions. In addition, check whether the buttons and indicator lights on the control panel are working properly. If any abnormality is found, the corresponding electrical components should be repaired or replaced in time.
In addition, the sealing device of the steel strapping machine needs special attention because it is directly related to the quality and effect of the packaging. Check whether the temperature of the sealing head is normal. Too high or too low temperature may cause the steel strap to be not firmly sealed. If the sealing effect is not good, the temperature setting of the sealing head should be adjusted in time or the heating element should be checked for damage. At the same time, attention should also be paid to the cleanliness of the sealing head to prevent the residual glue or impurities on the steel strap from affecting the quality of the sealing.
In the daily maintenance process, the training and record keeping of operators are equally important. Operators should be familiar with the basic structure, working principle and operation process of the machine, and use the machine strictly in accordance with the operating procedures to avoid damage to the machine due to misoperation. At the same time, a detailed maintenance record file should be established to record the time, content, replaced parts and the operating status of each maintenance.