What are the key points for the maintenance and care of Steel Strapping Machine?

For the maintenance and care of Steel Strapping Machine, here are some key points and suggestions:
Lubrication:
Lubrication is an important step to keep the machine running normally. For example, for steel strapping machines using air source, it is necessary to add an appropriate amount of spindle oil to the oil mist spindle to better lubricate the motor. The ideal oil supply is 30~60 drops per minute when the air motor is idling.
Clean the water separator and oil mist filter regularly, it is recommended to do it at least once every six months.
Add mechanical oil to the moving pins and shafts in time to remove iron filings on the rollers.
Air pressure adjustment:
Ensure that the air pressure range is ≥0.55Mpa, and use a pressure regulating valve to control the air pressure so that it is suitable for the required tension.
The adjustment of air pressure directly affects the tension of the steel belt. Once adjusted, the air pressure should be fixed.
Drainage:
Before using the pneumatic buckle-free steel strapping machine, the accumulated water in the air tank and water separator must be drained clean.
Throttle adjustment:
When the air pressure is low or a too soft steel belt is used for packaging, the throttle may need to be adjusted to change the air flow to obtain the ideal sealing effect.
Cleaning and inspection:
Regularly clean the surface and surrounding areas of the equipment to prevent dust and debris from entering the machine and affecting its operation.
Regularly check whether the bolts, nuts and other fasteners of the equipment are loose, and tighten them in time.
Regularly check whether the electrical equipment and wires of the equipment are worn, whether there are problems such as poor contact, etc., to avoid electrical failures.
Sealing quality inspection:
Regularly check the sealing quality to ensure that the sealing is tight and avoid damage to the product due to poor packaging.
Replace wearing parts:
According to the actual use of the equipment, regularly replace worn parts such as rollers, blades, punching scissors, etc.
When replacing parts, pay attention to the order of disassembly and assembly, and ensure that all fasteners are tightened.
Establish maintenance files:
Establish equipment maintenance files to record the maintenance history and failure conditions of the equipment so that common failures can be analyzed and solved in time.
In summary, for the maintenance and care of Steel Strapping Machine, the focus is on lubrication, air pressure regulation, drainage, throttle valve adjustment, cleaning and inspection, sealing quality inspection, replacement of wearing parts and establishment of maintenance files.